Connectivity wherever you need it...
The i-MO 210 Series 4G Router is ideal for providing a branch office, home office, temporary location or mobile service with a high performance, resilient connection to the Internet or corporate LAN.
As standard the appliance is equipped with 2 x integrated LTE-A / 4G+ compatible modems. The individual LTE/4G links can be bonded together for extra bandwidth and resilience or can operate independently. When operated independently, different traffic types can be routed on separate LTE links (e.g. one link for data, the other for VOIP). The unit can be provisioned with up to four SIMS from diverse networks to allow for management of data allowances by means of SIM switching.. High performance MiMo type LTE/4G+ aerial designs are supported (SMA type “main” and “diversity” connector for each modem / antenna).
The i-MO 210 Series 4G Router offers two Ethernet ports which can be configured either as 2 x LAN or 1 x LAN and 1 x WAN. Allows for the setup of bonding of cellular and other links or to establish failover from eg xDSL to 4G or from 4G to satellite.
The administrative web interface easily allows the appliance to be configured for link-failover (e.g. from WAN to cellular) in addition to link aggregation to increase performance.
The appliance boasts a small form factor of just 185mm x 65mm x 195mm and supports flexible mounting options. Power can either be provided by the included external AC adapter (100–240V, 50-60Hz) or alternatively the unit can be powered from a regulated 12V automotive type supply.
Two external USB 2.0 ports provide the option for additional hardware upgrades eg the use of approved external dongle style LTE/4G modems.
Bonds multiple connections:
i-MO allows you to combine or bond wired and wireless services as you need them. The i-MO 210 Series 4G routers can bond two LTE / 4G connections plus one WAN connection as standard for unrivalled speed and uptime. Add external USB devices to further enhance performance and resilience.
The i-MO bonding algorithm automatically distributes traffic across available connections and manages these to achieve optimal performance, equalisation of data consumption. Also offered is the facility for automatic failover between primary (e.g. DSL) and secondary (e.g. wireless) connections.
Bonds as you like it:
i-MO uses an end-to-end tunnelling protocol to aggregate bandwidth. Assembling and managing data across multiple bearers requires a suitable Appliance at either end of the link. With i-MO you have the option of using our proven vendor delivered Managed Service (no equipment required other than at the site where connectivity is required) or, alternatively, deploy our Virtual Concentrator in a maintained environment (e.g. your Data Centre) and deliver your own bonding services. All i-MO Appliances can also support simple load balancing across available connections where low cost and simplicity is a priority. Load balanced setups do not require a second endpoint appliance.
4G LTE compatibility built in:
As standard two LTE-A / 4G+ cellular modems are embedded in the i-MO 210 Appliance. These support cellular mobile data networks which comply with 4G+ / LTE-A, 4G / LTE, HSUPA, HSDPA, 3G, EDGE and GPRS standards.
|Technical Specifications||210 Series|
Mobile / Desktop
185 x 65 x 195 mm
2 x USB 2.0
|Cellular Data Connectivity||
2 x 4G/LTE - A CAT6 Modems
6 x SMA - 4 x Cellular/MiMo + 2 x WiFi
|LAN / WAN Interface||
2 x Gigabit Ethernet (Max 1 x WAN)
12VDC +/- 5%
External AC Adapter 100 - 240 VAC (47 - 63Hz)
|Max Power Consumption||
Estimated power consumption : 20W ( Wifi + 4G)
-20°C to +60°C
10% to 90% (non-condensing)
Intel® Atom N2800
950Mbs (> 150 Mbps with VPN)
|WiFi WLAN Access Point||
|i-MO 210 Series Features|
i-MO Firmware with:
OptiBond™ Advanced Bandwidth Technology
Web Administrative Interface
Export / Import Configuration
Command Line Interface
WAN Link Health Check
Multiple LAN subnets supported
802.11 ac Access Point
Up to 5 concurrent VPN Tunnels (incoming and outgoing)
Ciphers: AES and 3DES
Hashes: MD5 and SHA1
Dead Peer Detection
Stateful firewall with support for PPTP, FTP,SIP,H.323
Multiple zones: WAN, DMZ, LAN
i-MO Product Brochures